<-- Restoration home



Rot-surprise on a house I had
contracted to paint this summer.
--------------------------------


What was left of the double rim joists after
cutting away rot:



Double rim joists once again.  Treated 2x8s
sistered onto existing and troweled with
white Vulkem:



Added an angle joist for good measure:



Vulkem in deck board joints:



New piece for bottom 3.5" of 
column which had rotted:




New piece for column 
after sanding to round.

White Vulkem troweled smoothly over 
seams and joints on deck boards:





More rot-surprise.  The back porch.

Yet another thoughtless design, engineering-wise.
(Designed to quickly rot.)

Motor oil on rim top plate after demolition:



All-cedar repairs with all seams
and joints Vulkemed (white Vulkem):







Just completed, 11/19/2026:

Rot-surprise on a recently-built porch.  I'd been 
asked to replace a single bottom rail along the steps.
------------------------------------------------------

I discovered that the entire rail structure was rotten.

The bottom rails had been designed to quickly rot.
The spindles were set into recesses.  And the spindles
had not been treated on their bottoms.

I demo'd the entire rail structure and made new
bottom rails out of cedar with simple bevels.

I needed to saw off the bottom couple inches of
half the spindles, as they had rotted.  New cedar
bases got Gorrila-glued on, then sanded to create
invisible joints:








Vulkem is applied to the spindle bases:
















Upper portion of newel posts had also rotted:





<-- Restoration home